Specialized Stumpjumper Evo S-Works

$8,519.29 CAD $14,999.00

SKU: 96322-0005
Color: Black Liquid Metal/Carbon/Black
Size

The S-Works Stumpjumper EVO is much more than just a trail bike, it’s a shred-sled built to full-send down the gnarliest trails. Featuring an all-new design, with an adjustable head tube angle, 150mm of performance tuned travel, and the adaptability of S-Sizing, this thing is an absolute ripper. The S-Works Stumpjumper EVO—get rowdy.

In true S-Works fashion, the S-Works Stumpjumper EVO is built to the hilt. A Fox Factory fork and rear shock handle suspension duties, while SRAM Code RSC four-piston brakes scrub speed, and a full SRAM AXS wireless groupset completes this lust-worthy build.

  • All the travel in the world is useless without the proper shock tuning and kinematics. For the new Stumpjumper EVO design, we prioritized kinematic performance. Applying lessons learned while developing the Enduro, then following that with more than 1,000 hours of field and suspension lab development, we’ve not only improved the pedaling performance of the Stumpjumper, but we’ve made it more capable, agile, and lively. We increased anti-squat, so the suspension better resists pedal bob, and we further improved bump performance on square-edge hits. Bottom line? This thing shreds trails, not legs.
  • The S-Sizing geometry of the new Stumpjumper EVO is our most progressive yet. Long, low, slack, short offset fork, steeper seat tube angle – these are requirements for modern progressive riding. But not everyone jibs the same way, which is why the geo on the new Stumpjumper EVO is fully adjustable with six different settings. You can adjust the BB height by 10mm, you can adjust your head angle by two-degrees, and you can make these adjustments independently of each other. Finally, if you want to go full-party mullet-mode, the EVO lets you run a 27.5-inch rear wheel mated with a 29-inch front.
  • Rider-First Engineered™ frames use a size-specific approach to ride characteristics that ensures benchmark handling and flawless performance, regardless of frame or rider size. Whether you’re a jump-happy grom riding an S1, or a DH-fiend giant in need of the lengthy S6, you’ll experience the same ride traits – rail-sharp cornering and balanced front and rear stiffness – at the lightest possible weight.
  • We introduced the SWAT™ door on the Stumpjumper in 2016, adding room IN your frame for those “oh sh**t” necessities like pumps and spare tubes, and immediately rendering jersey pockets redundant. With the new Stumpjumper, we have increased the volume and added a SWAT™ Bladder, giving you an extra 22oz of water storage – the same size as a small water bottle – hidden in your downtube.

 

  • SWAT: Increased-volume SWAT™ Door integration with 22oz SWAT™ Bladder
  • Frame: FACT 11m carbon chassis and rear-end, carbon shock extension, asymmetrical design, 29 Trail Geometry, SWAT™ Door integration, head tube angle adjustment, horst pivot BB adjustment, threaded BB, fully enclosed internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 150mm of travel
  • Seat Binder: Alloy 38.6
  • Rear Shock: FOX FLOAT DPX2 Factory, Rx Trail Tune, EVOL Air sleeve, Kashima coat, 3-position adjustment w/ Open Mode adjustment, S1:210x50mm, S2-S6:210x55mm
  • Fork: FOX FLOAT 36 Factory, GRIP2 damper, Kashima Coating, 15x110mm, 44mm offset, S1: 150mm of travel, S2-S6: 160mm of travel
  • Chainrings: Alloy 30T
  • Crankset: SRAM X01 Eagle, DUB, S1:165mm, S2-S5: 170mm, S6: 175mm
  • Chain: SRAM XX1, 12 speed
  • Bottom Bracket: SRAM DUB, BSA 73mm, threaded
  • Shift Levers: SRAM XX1 Eagle AXS
  • Rear Derailleur: SRAM XX1 Eagle AXS
  • Cassette: SRAM XG-1299 Eagle, 10-52t
  • Rims: Roval Traverse SL 29, hookless carbon, 30mm inner width, 2Bliss Ready, hand-built, 28h
  • Inner Tubes: Standard, Presta Valve
  • Rear Tire: Eliminator, GRID TRAIL casing, GRIPTON® compound, 29x2.3"
  • Spokes: DT Competition Race
  • Front Tire: Butcher, GRID TRAIL casing, GRIPTON® T9 compound, 2Bliss Ready, 29x2.6"
  • Front Hub: Roval Traverse SL, sealed cartridge bearings, 15mm thru-axle, 110mm spacing
  • Rear Hub: Roval Traverse SL, DT Swiss Star Ratchet, 54t engagement, SRAM XD driver body, 12mm thru-axle, 148mm spacing
  • Rear Brake: SRAM Code RSCm 4-piston caliper, hydraulic, 200mm
  • Front Brake: SRAM Code RSC, 4-piston caliper, hydraulic disc, 200mm
  • Handlebars: Roval Traverse SL Carbon, riser bar, 6-degree upsweep, 8-degree backsweep, 30mm rise, 800mm, 35.0mm
  • Saddle: Bridge, 155/143mm, Hollow Ti-rails
  • Stem: Deity Copperhead, 35.0mm
  • Grips: Deity, Knuckleduster, Black
  • Seatpost: RockShox Reverb AXS, 30.9, 1X remote, (S1:100mm, S2: 125mm, S3: 150mm, S4-S6: 170mm)
 
  S1 S2 S3 S4 S5 S6
Crank Length 165mm 170mm 170mm 170mm 170mm 175mm
Stem Length 35mm 35mm 50mm 50mm 50mm 50mm
Seatpost Length 100 mm 125 mm 150 mm 170 mm 170 mm 170 mm
Saddle Width 155mm 155mm 143mm 143mm 143mm 143mm
Handlebar Width 800mm 800mm 800mm 800mm 800mm 800mm
Reach 408mm 428mm 448mm 475mm 498mm 528mm
Stack 613mm 617mm 626mm 635mm 644mm 654mm
Wheelbase 1167mm 1191mm 1216mm 1247mm 1285mm 1319mm
Chainstay Length 438mm 438mm 438mm 438mm 448mm 448mm
Front Center 732mm 756mm 780mm 809mm 838mm 873mm
BB Drop 40mm 35mm 35mm 35mm 35mm 35mm
BB Height 335mm 340mm 340mm 340mm 340mm 340mm
Seat Tube Angle 78° 77.6° 77.2° 76.9° 77° 77°
Seat Tube Length 385mm 385mm 405mm 425mm 445mm 465mm
Bike Standover Height 733mm 764mm 763mm 762mm 767mm 770mm
Fork Rake/Offset 44mm 44mm 44mm 44mm 44mm 44mm
Trail 131mm 131mm 131mm 131mm 131mm 131mm
Fork Length (Full) 561mm 571mm 571mm 571mm 571mm 571mm
         
Product Variants SKU/UPC
  • Specialized Stumpjumper Evo S-Works: Black Liquid Metal/Carbon/Black / S5: SKU: 96322-0005 - UPC: 888818753062
  • Specialized Stumpjumper Evo S-Works: Black Liquid Metal/Carbon/Black / S6: SKU: 96322-0006 - UPC: 888818752812